Brownian motion

around the essentials…

 

REORDER_HDR, again and again

If you wish to use vlan sub-interfaces in linux, and sub-sub-interfaces, and sub-sub-sub-… and if you wish to ping something — sure, you may wish to have them only for switching, but if you wish to ping — don’t forget to re-set REORDER_HDR flag:

ip link set up dev eth2
 
vconfig add eth2 100
ip link set up dev vlan100
vconfig set_flag vlan100 1 0
 
vconfig add vlan100 200
ip link set up dev vlan200
vconfig set_flag vlan200 1 0
 
# ....etc-etc
 
vconfig add vlan800 900
ip link set up dev vlan900
vconfig set_flag vlan900 1 0
 
ip add add 192.168.1.100/24 brd 192.168.1.255 dev vlan900
 
ping 192.168.1.3

Note using command vconfig set_flag DEV 1 0 — i mean exactly this :-)

Now (since 2.6.x?.. can’t remember, doesn’t matter) Linux kernel creates vlan interfaces with REORDER_HDR=1.

You can verify current value of REORDER_HDR flag with command like this:

# cat /proc/net/vlan/vlan900
vlan900  VID: 900	 REORDER_HDR: 0  dev->priv_flags: 1
         total frames received          172
          total bytes received       222546
      Broadcast/Multicast Rcvd            0

      total frames transmitted          405
       total bytes transmitted       283743
            total headroom inc            0
           total encap on xmit           26
Device: vlan900
INGRESS priority mappings: 0:0  1:0  2:0  3:0  4:0  5:0  6:0 7:0
 EGRESS priority mappings: 
(No Ratings Yet)

Leave a Reply

XHTML: Можете використовувати такі теґи: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Recent Posts

Tags

Archives